![OCRobotics](/img/default-banner.jpg)
- Видео 22
- Просмотров 517 998
OCRobotics
Добавлен 20 июл 2010
Welcome to the official OC Robotics channel on RUclips!
OC Robotics are world leaders in confined space automation - our snake-arm robots are designed specifically for remote handling operations within confined or hazardous spaces.
Where snake-arm robots excel is in their long, slender and flexible design; they can effortlessly fit through small openings and around obstacles. They do not have prominent elbows that potentially snag or cause damage to sensitive equipment and they are easily maneuvered into position and retracted back without disturbing their environment.
OC Robotics are world leaders in confined space automation - our snake-arm robots are designed specifically for remote handling operations within confined or hazardous spaces.
Where snake-arm robots excel is in their long, slender and flexible design; they can effortlessly fit through small openings and around obstacles. They do not have prominent elbows that potentially snag or cause damage to sensitive equipment and they are easily maneuvered into position and retracted back without disturbing their environment.
MiniX Snake-arm Robot
Designed for the oil and gas industry, the MiniX system eliminates the challenges of gas vessel inspections.
Просмотров: 5 271
Видео
General Electric TBC Shield Sprayer System
Просмотров 2 тыс.2 года назад
GE continually pushes the boundaries to deliver dynamic inspection, cleaning, and repair technologies that reduce downtime and cost. Introducing a robotic arm application of Thermal Barrier Coating (TBC) Shield to an engine, on wing in hangar. This dynamic process is now being applied to GEnx engine combustors by GE's On Wing Support team in Doha.
OC Robotics/Magnox - Dragon LaserSnake Deployment
Просмотров 7 тыс.6 лет назад
A laser-cutting robotic snake has been put to work on the highly radioactive core of the redundant DRAGON reactor. The long, flexible LaserSnake passed through a narrow hole in the three meter thick concrete around the core. It sliced through a 400mm diameter vessel attached to the reactor core at Winfrith in Dorset.
Automated Sealant Deposition in Confined Aero Structures
Просмотров 1,7 тыс.6 лет назад
Automated Sealant Deposition in Confined Aero Structures
LaserSnake2 - Laser cutting for nuclear decommissioning at Sellafield - a world first.
Просмотров 22 тыс.7 лет назад
This film shows a world first: the LaserSnake (a snake-arm robot with a laser cutter) successfully dismantling redundant equipment in a radioactive area of a nuclear facility. Working in a reprocessing plant at Sellafield, the LaserSnake was used by OC Robotics and TWI, together with Sellafield, to cut up a dissolver vessel. The culmination of a project part-funded by Innovate UK, this versatil...
OC Robotics - Snake arm 101
Просмотров 29 тыс.7 лет назад
All you need to know about our snake-arm robots - watch carefully, as we'll be testing you! OC Robotics designs and manufactures snake-arm robots, which are specifically designed to perform remote handling operations in confined and hazardous spaces. OC Robotics has delivered robots for industries spanning - amongst others - nuclear, aerospace, medical and security. It has also provided consult...
LaserSnake2 - First Laser Cutting Trials at TWI - Feb 2016
Просмотров 3,7 тыс.8 лет назад
The LaserSnake system was configured for laser cutting and shipped to TWI for integration with the ULO laser process head. During the trials the system cut both curved and flat mild and stainless steels up to 40mm. A number of piercing operations were also successfully performed. The team established cut set up and cutting parameters. The project partners were able to build on earlier laborator...
LaserSnake2 - Laser Cutting Trials at TWI - May 2016
Просмотров 5 тыс.8 лет назад
The LaserSnake system has successfully completed its second set of laser cutting trials at TWI. The snake-arm robot combined with the ULO laser process head has shown itself to be a versatile system for in-situ nuclear decommissioning tasks.
OC Robotics - TMCLK JetSnake
Просмотров 4,9 тыс.8 лет назад
OC Robotics have successfully delivered and commissioned a new JetSnake system to the Dragages/Bouygues joint venture in Hong Kong. Following trials of the first JetSnake system in Miami in 2013, Bouygues Travaux Publics (BYTP) ordered a system for the Tuen Mun Check Lap Kok Link (TMCLK) currently under construction between the mainland and Hong Kong International Airport.
LaserPipe - Example Deployment
Просмотров 4,1 тыс.8 лет назад
As part of the LaserPipe feasibility study, the team investigated a number of applications for this technology. One such application is the welding of pipe sections accessible only through pressure vessels, or manifold, maintenance ports. This animation is one such example where a snake-arm robot could provide a solution to difficult access. www.ocrobotics.com/laserpipe/ ruclips.net/video/jpbOE...
LaserPipe - In-bore laser welding
Просмотров 50 тыс.8 лет назад
LaserPipe is an Innovate UK funded R&D project looking into the feasibility of in-bore pipe welding using industrial high-powered lasers, coupled with snake-arm robotics for hazardous or confined space deployment. www.ocrobotics.com/laserpipe/
OC Robotics - Series II, X125 snake-arm robot for UCL
Просмотров 8 тыс.8 лет назад
OC Robotics has successfully delivered a Series II X125 snake-arm robot to University College London. This system will be used for robotic deployment of photogrammetry capability for inspection and measurement of confined and cluttered 3D environments.
OC Robotics - Mobile snake-arm robot
Просмотров 5 тыс.8 лет назад
OC Robotics new mobile snake-arm robot. The 1.5m arm is mounted on an untethered, omnidirectional vehicle, giving it the freedom to explore complex structures that a conventional robot could not. OC Robotics have successfully delivered this system to Oxford Mobile Robotics Group. www.ocrobotics.com/news/mobile-snakearm-robot-delivered-to-oxford-mrg/ mrg.robots.ox.ac.uk/
OC Robotics - Introducing the Series 2 - X125 system
Просмотров 282 тыс.9 лет назад
OC Robotics is pleased to introduce the Series II - X125 system. This Series II system builds upon the successful JetSnake product deployed on the Miami port tunnel boring machine. The Series II - X125 system delivers a 6kg payload, arm bend of over 225 degrees and a highly flexible tip. The 2.2m arm has passed a series of extended operational tests and been designed for increased reliability a...
OC Robotics - JetSnake: Snake-arm for TBMs
Просмотров 3,2 тыс.9 лет назад
OC Robotics - JetSnake: Snake-arm for TBMs
OC Robotics - Security inspections with a snake-arm robot
Просмотров 1,8 тыс.12 лет назад
OC Robotics - Security inspections with a snake-arm robot
OC Robotics - Snake-Arm Demonstrations
Просмотров 9 тыс.12 лет назад
OC Robotics - Snake-Arm Demonstrations
OC Robotics - BBC Points West - Sellafield nuclear snake arm robot
Просмотров 11 тыс.12 лет назад
OC Robotics - BBC Points West - Sellafield nuclear snake arm robot
OC Robotics - BBC Made in the West - Sellafield nuclear snake arm robot
Просмотров 2,3 тыс.12 лет назад
OC Robotics - BBC Made in the West - Sellafield nuclear snake arm robot
OC Robotics - Ringhals Case Study - snake arm robot
Просмотров 6 тыс.13 лет назад
OC Robotics - Ringhals Case Study - snake arm robot
Hello,
My proctologist should get one of these!
raised by wolves
Hanzhen harmonic drive gear , strain wave reducer, robot joint , over 30 years experience
Super!
good to see this thing has come a long way. Hope the industry is loving this as much as it deserves. IT's an amazing piece of kit.
Unironically an amazing piece of tech. Now the engineers won't have excuses about not being able to inspect hard to access areas of planes and other large equipment. And they won't have excuses about maintenance either.
Nice, where can I purchase these? And do you offer smaller versions?
I want to make my own snake like or tentacle robots
This is crazy
Octopus ?
Please do not look away from...the nozzle
Imagine a mad scientist attaching 4 of these to his back and fighting a man in tights haha lmao
This is like alien technology! Am I crazy?
Want to see this as a security robot that automatically goes to an area where it senses movement to check on it. It would go through small holes just big enough for it to travel through.
Please do not be alarmed. We are about to engage... the Nozzle. Please do not move while the Nozzle is engaging. Moving will disrupt calibration of... the Nozzle. Please wait while we calibrate... the Nozzle. Please do not look away from... the Nozzle. The Nozzle is now calibrating. The Nozzle is still calibrating. The Nozzle has completed calibration. Thank you.
Make 4 of them and stick them on a backpack and you got something Superior
CAN YOU IMAGINE I TOOL LIKE THIS ON SPACEX STARSHIP
My naym is snek My body long My head is smol But lazer stronk And when it time To do a job I power up And cut the lead
*Peter Parker left the chat
Hi. Our version of the robot snake arm ruclips.net/video/iEjnBooSrtU/видео.html
i wish i make one of those as doctor octopus
cool
Wanted to see how close to reality the tentacle arm is on Metal Gear Gekko. Closer to reality than I thought.
Super cool.
* metal tentacles like from scifi movies are invented. * only gets 257K views.
Nice remote system..
Nice.
Finally we can get some real tentacle porn
Hello, It's Vladislava from NTD Television . This video is great: ruclips.net/video/_gU6TWGynkU/видео.html Our mission is to uplift the world through sharing Truth, Hope and Humanity. We would like to upload it on our media pages and further details available in this link: goo.gl/WHMfJQ . Please drop me an email at vladislava.maskova@epochtimes.nyc if you are the copyright owner. Thank you very much. This is our website: www.ntd.tv/about/
This is a real-life horror movie just waiting to happen.
Played one in my head while watching the video 🤦😂
Please do not be alarmed. We are about to engage...the Nozzle.
PARADISM ORG. IS THE FUTURE OF THE WORLD....RAEL ACCADEMY RUclips.
holy shit
I have a perverted mind U-U
OK, but if you want to test me, you have to provide actual range values for θ, slew rates and so forth - trust me, I'd take the test - trying to build elephant trunks to mount each camera in linked project (shift from outer rigid to inner rigid) - much better/denser visual model than structured light (ex Project Tango invitee) - even at small scale, with 135 Kg monofilament and nitinol and 3dprinting, math foundation and process control is tough and I could use a test :-) So by all means, please do a video test for real. Just put a good study guide in the description :-) I just think about the weight of your system and some of the rotational physics and cringe. I'm _never_ going beyond lightweight :-D hackaday.io/project/21966-quamera
Hello, can I upload this video on my RUclips channel vb.ai ?
Audio's gone on the video, youtube ate it. Amazing demonstration otherwise.
The snake-arm works by actuating steel cables, much like the human spine works. The strength and accuracy of the arm is limited by the tensile strength of the cables, the rigidity of the segments and their joints, and the actuators on the back. You seem to use electric motors for the actuators. Are there plans on releasing a version where the actuation is done by pneumatic motors, for higher strength and accuracy? I assume it would be rather costly. The reason I ask is, because the arm seems a bit jittery. Unless you compensate for that at the head with some sort of alignment like a chicken-head, I see this jittery producing uneven sealant, which isn't a problem with the current hydraulic arms.
I, for one, welcome our new tentacle overlords.
The stuff nightmares are made of... I'll take ten.
Lmao me too
the nozzle is calibrating
Damn Machine, you scary!!!
seen enough hentai to see where this is headed
When a dinosaur needs a colonoscopy...
1:17 I love how robust it is, that you can go around poking things apart with the nozzle :D
In theory could one scale this up to e.g. the size of the space station arm? At least would it be able to take similar loads etc if you did?
hmm, I suppose the idea would be to stick one of these on the end of the existing arm...
This is Brilliant! I want one
The cuts are a bit wobbly, I hope that can be solved. Maybe with a smaller "precision" aiming head attached to the end?
This robo-arm is totally awesome, and after some fine tuning, I could see it being used in nearly every industry! It certainly looks cheaper and more versatile than most CNC-styled robo-arms out today.